It is the responsibility of every company to ensure that their hazardous materials are stored safely. Unfortunately, this is often overlooked until there is an inspection, an incident happens, or an insurance claim requires it. Most factories, workshops, and storage facilities that deal with hazardous materials like solvents, oils, adhesives, or cleaning and processing chemicals, are affected by COSHH regulations. Handling these materials improperly can lead to more issues than simply needing to complete more paperwork.

The first step to compliance is understanding what COSHH requires. Any substance that poses a threat to the health of workers must be assessed. Storage procedures must also be evaluated as part of the assessment. Proper storage is much more than closing the lid of a drum and storing it in the corner of a room. Leaks and spills need to be contained and some materials require that incompatible materials be separate to limit the concentration of toxic or flammable materials. This is especially critical for flammable, oxidizing, and corrosive materials.

When it comes to compliant storage, segregation is one of the most overlooked. The condition of the storage area can also impact the hazard levels. Facility managers often find it is best to avoid using general purpose shelving. This makes it easier to avoid the need to place multiple containers of different categories in the same area.

Ventilation is as important as containment. A cabinet without air movement can cause vapours to accumulate, posing a risk of exposure to a concentrated dose of fumes when someone opens the cabinet door. Specially designed hazardous storage cabinets have ventilation features that can be connected to an external duct; this way, vapours escaping through the cabinet seal will be removed from the workspace, instead of accumulating in the workshop or storeroom.

Another important aspect to consider is bunding capacity. Legislation generally requires a bund or an internal sump within a cabinet to hold at least 110% of the maximum stored container, or a specified percentage of the total volume, whichever is larger. It may seem like a minor detail, but it is exactly the type of detail that the auditor will focus on. Retrofitting bunding is always more disruptive than properly specifying bunding the first time the cabinet is purchased.

Fire resistance is an additional concern for flammable liquids. Cabinets designed for flammable liquids are usually made from double-skinned steel with an insulating air space that offers some fire resistance. This gives additional time for evacuation as well as for emergency response prior to contents being exposed to direct flame. This is unlike other chemical storage where fire resistance is not as essential, but the cabinet must still be leak proof and corrosion resistant.

Storage placement is critical as well. Fires can breakout from storage and, therefore, should not be placed near walkways or fire exits. Further, storage should be placed so that any possible spills would drain away from watercourses or drains. Many places have hazardous storage kept outside in a secure, ventilated area, which also decreases the chance of hazards in the building and makes compliance with COSHH and environmental permitting much easier.

This can be complicated, but should be precise. An internal audit of what is being stored, containers, quantities, and location is usually enough to show gaps. Procurement teams needing replacement storage should look for cabinets designed for specific classes of substances, with bund capacity and ventilation, instead of thinking any lockable cupboard will work. Getting this done protects the site and staff and keeps the paper trail simple for inspectors.

Leave a Response