Storage of timber is always tricky and sometimes costly, and can create an unsafe working environment for your staff. The prices of timber storage systems are often less than the cost of a single injury. Many systems are modular and can be retrofitted to older racking.

First, determine your stock profile

How long is the longest stock item, and how many stock items of varying length do you hold? What is the expected weight of the heaviest stock bundle that you would place on an arm or beam? What portion of your stock is sheet material (OSB/MDF/ply) versus sawn/planned material? Some stock items, such as treated carcassing, are turnover items for a merchant, and a stock racking system to hold carcassing is very different from the system used to hold seasoned hardwood boards. Don’t forget to plan for business growth.

Long sheet and long timber materials require different approaches

Long timber materials usually rely on cantilever systems. Loading and removal of bundles is easier compared to standard framed systems and there is no restriction to bay widths. The length of the arm should be the depth of your bundle and a little more to ensure the stock is fully supported. The arm can be tilted up slightly to keep stock in place.

Sheet materials are better stored flat on sheet racking or pallet racking where the stock is fully supported. Thin sheet materials stored vertically on narrow supports can bow and bend. A-frame storage can be used to free up floor space. However, this can be difficult to manage when a large quantity of materials are stored this way. Many yards end up with a mixture of A-frame and flat storage systems and this is sensible to plan from the start.

Load capacity is about the arm, not just the upright. Load ratings come from manufacturer’s documents for the configuration you purchase. Capacity is impacted by the length of the pick and place arm, how the arm is mounted on the upright, how tall the upright is, and the distance between the uprights. Remember that timber is rarely loaded evenly. A forklift operator placing a heavy pack at the tip of an arm applies far more leverage than the same pack placed close to the upright. Educate your team about loading practices and display capacity notices provided by the supplier.

Think about access and handling equipment

Racking exists to serve the way you move stock. Plan aisle width to accommodate the largest piece of handling equipment you will use. Narrow aisles save space but may restrict the vehicles you can use, and long loads need space to turn. If staff will be hand-picking short lengths, consider keeping those at a comfortable working height, with the heaviest packs loaded low and the lightest loaded high.

SAFETY, INSPECTION AND COMPLIANCE

In the UK, workplace safety dictates that racking is the responsibility of the employer and must be maintained in a safe condition. Industry recommendations such as the SEMA guidelines and BS EN 15635, dealing with the use and maintenance of steel static storage systems, indicate the need for an inspection programme to be put in place by an authorised person, and a procedure to be implemented to report any damage. Forklift impacts, bent arms, missing safety pins, and unlevel bases, to name a few, must not be ignored. Maintain the inspection records, and never change the configuration of the racking without determining the effect it has on the capacity.

Selecting a supplier

Due to the different loading patterns and variation in stock in the timber trade when compared to general warehousing, specialist knowledge of the timber trade is valuable. When workshop and merchant customers compare racking systems, it is useful that they study timber storage racking to understand the limitations of the trade before committing to a system.

There is a quick return on a minor investment of time to determine your stock, match the system to the stock, cross check system capacities, leave space for the equipment, and establish a routine inspection process. With these measures in place you can rest assure your stock, staff and business margins are safe.