There’s a reason some materials are repeatedly selected to deal with increased heat in a system. Some materials can be very unreliable. Selecting a dependable material to deal with thermal stress can provide a system that operates reliably and effectively and can save money by avoiding system outages.

What Makes Copper the Right Choice?

Copper has a long history in engineering. Knowledge of the ways Copper behaves in sealing applications and Copper’s behaviour as a conductor of heat makes Copper a beneficial engineering material. Unlike other materials Copper conducts heat to other parts of the system, which helps decrease the concentration of thermal stress in a system.

Copper is also malleable and, under sufficient pressure, will deform slightly to provide a barrier. This is important when paired surfaces are not perfectly smooth, and any gap would present a potential leak. Copper Seals can be used in a variety of applications, flanged connections, cylinder heads, and exhaust systems. Copper Seals are also used in the automotive, oil and gas, hydraulics, and industrial manufacturing industries. The expectation of each application is similar: other materials will fail where Copper Seals are expected to succeed.

Temperature Resistance: Where Other Materials Fall Short

Rubber and polymer gaskets can’t be exposed to high heat. Many elastomers start to¹ significantly degrade at temperatures exceeding 200ºC. With continuous exposure, they become hard, fissured, and permanently compressed, losing their ability to seal.

Metals, especially copper, perform much better. The melting point of copper is 1,085ºC and in sealing applications, copper can withstand continual thermal cycling in engine bays, boiler circuits, or pressurised hydraulic circuits.

Performance of copper is better than softening elastomers, which start losing their sealing effectiveness and sealing function below 200ºC after extended use.

Corrosion and Chemical Resistance

Most heated gases and liquids are corrosive. In many industrial applications, seals are exposed to oils, fuels, hydraulic fluids, steam, and the chemical processes involved in manufacturing. Copper also does well in many of these situations, especially when used in composite seal design, or coating/plating.

In combustion and exhaust applications, seals can face multiple cycles of thermal shock corrosion and contact with particulate residue and combustion gases. The ability of copper to retain its shape and surface contact is one of the reasons it’s used in engine re-build kits and performance applications.

Copper is susceptible to corrosion from continuous contact with acid or ammonia. While it is still important to identify the right type of seal copper for the environment, in some cases, oxygen-free copper or maybe more appropriate for ammonia than the regular commercial grade copper.

Things to Consider

You should know some of the factors because this might be your first time purchasing copper seals.

The size of the copper seal must be taken into consideration. If the copper seal is of the wrong size, it will either not seal at all and leak or it can be damaging to the part it will seal.

Copper can fill spaces but should not be relied on. Good seal surfaces should be undamaged, and the flanges should be inspected and cleaned to ensure there are no foreign materials on the sealing surfaces.

You should not torque copper seals to arbitrary values. If torqued much more than it should be, seals will be extruded; but if it is torqued much less than it should be, it will result in an uncompressed seal. Follow the instructions and always use a calibrated torque wrench to set the seal to the recommended value.

A Reliable Choice When the Situation is Difficult

Copper Seals are one of the few well-founded, affordable options for sealing joints exposed to heat, pressure, and mechanical stress. Their requirements are few and are easily satisfied by the correct sizing and cleanliness of the joints, and the appropriate treatment. Their longevity, reliability, and resistance to the conditions which quickly corrode inferior materials, make them an excellent choice.

Whether the copper is for engine rebuilds, repair of factory piping, or even supply for new construction, it is a material that warrants understanding before it is chosen.

Leave a Response