In the recent past, the popularity of the electric tile cutters has grown immensely, as compared to manual tile cutters. These tools are well renowned for their accuracy. Additionally, they cut with a neater finish and do not require a lot of effort to use. These electric cutters may also be used to cut an array of shapes, which may not be possible with the manual cutters.
When shopping for these essential tools, you should only settle or the best models from the reputable and well renowned companies in the country. For the tool to be of optimal help to you, you need to know how to use it. Throughout this article, the appropriate way of using these electric cutters will be discussed.
Fill the water container
Before using this piece of equipment, it is advisable to first fill the water container. For the majority of models in the market today, the container is situated below the saw platform. The water level in the container should reach about 3 mm to 4 mm above the cutting bit edge, when the tool is in the cutting position. Additionally, you should also check and top up the water level while cutting, such that the cutting bit of the blade remains covered in water, throughout the cutting process.
If your tile cutter has a splash guard, you are supposed to adjust its height, such that it just hovers above the tile surface.
Mark the tiles
Before placing the tiles on the cutter, you should mark them. For this purpose, you will require a pencil, a square and a tape measure. To make the corner cuts, you are supposed to make two intersecting lines, starting from any side of the tile. To make a straight cut, use the square to mark a line on the point you want the tile to end. You should also mark diamond shapes before making the cut. While marking diamond shapes, you should consider the fact that the cutting machine takes off 2.5 mm in the process of cutting.
Wear protective glasses
Before using electric tile cutters, it is advisable to wear protective clothing, including safety glasses. This is meant to prevent particles and dust from the tiles from getting into your eyes while cutting. You should also allow yourself plenty of room to operate the machine.
Cut accurately
Different tile cutting machines have different cutter guide formations. However, the majority of them use the X-Y axis. You should adjust the guides of your cutter such that the saw will fall directly on the mark lines when you place the tile on the guides. You should also ensure that the blade is dripping with water before starting the machine. Now push the tile towards the wheel and through the cut using steady and even pressure.
If you intend to make a cut on a small section of the tile, where the hands will be too close to the electric tile cutters, it is advisable to use a push stick and guide the tile past the cutting saw. This is to prevent injuries while using the machine.