Air compressors are appliances responsible for converting power to potential energy. These devices force air into a storage tank thus increasing the tank pressure. The devices eventually shut off when pressure reaches the upper limit. The stored air which is compressed is kept in the tank to be used later. Air compressed by these devices contains energy that can be utilised in a number of ways. This is possible by harnessing the air’s kinetic energy as it is being discharged. The storage tank depressurises when the air is released and once the pressure reaches its limit, re-pressurising of the tank takes place. Air compressor automatically turns on to force air again until the tank pressure attains its upper limit. To know how much reserved compressed air is available, you check the tanks gallon size.
The devices operate on an electric motor, a gasoline or a diesel engine. Their power is measured in CFM (cubic feet of air per minute) and HP (Horsepower). Compressors powered by electricity are used widely in garages, production and workshops that have a permanent source of electricity. Most of them are 230-240 Volt or 110-120 Volts. The devices come in “twin tank”, “vertical”, “pancake” and “horizontal” shapes. Gasoline or diesel compressors are essential in remote areas that do not have an access to electricity. These need exhaust gases ventilation and are noisy. Compressors can be portable or stationary. This is determined by their size and purpose.
Types of Displacement.
There are two designs made as per the operation principle. The Turbo and Rotary screw compressor. In the two styles, many methods of air compression are used. These are partitioned into rotor-dynamic or positive-displacement kinds.
1. Rotor-Dynamic Displacement
These types of compressors have a component which transmit its kinetic energy to the air. The kinetic energy is then changed into pressure energy. A spinning component known as impeller generates centrifugal force which pressurise air by accelerating and decelerating air that has been captured. Axial and centrifugal compressors are among the rotor-dynamic displacement machines.
2. Positive-displacement
The working of these types is different. They force air into a chamber with decreased volume to compress air. General positive-displacement compressors include the Rotary screw, Vane and Piston type air compressors.
Operation
Air compressors need to cool because of adiabatic heating. Cooling of these devices can be facilitated by the use of water or air. Some of the machines like the rotary kind may be cooled using oil. Atmospheric variations determine the appliances cooling.
Uses
There are numerous uses of air compressors. Some of the general applications of the devices include:
• Filling gas cylinders
• Filling tires
• Supplying moderate-pressure clean air for running pneumatic HVAC control system valves in schools and offices buildings.
• Supplying a submerged surface supplied diver with moderate-pressure clean air
• Providing large-scale industrial processes with moderate-pressure air in large amounts
• Supplying power pneumatic tools like jackhammers with large amounts of moderate-pressure air
Oil-less and oil-lubed are the two types of air compressor pumps used in air compressors. The oil-less pumps produces better quality air but has some limitations. They do not last long and are louder and more expensive.